Optimation
Products
|
OptiLogic™ OL 4058
8 Slot RTU Base with OptiLogic/UDP and IPX
Optimation's OptiLogic™ Remote Terminal
Unit provides point of use I/O and
operator panel capabilities with a high speed link to a PC. OptiLogic™ delivers
the highest levels of flexibility, ease of use and performance
at the lowest cost of any PC-based distributed I/O subsystem on
the market.
The OptiLogic™ Remote Terminal Unit
(RTU) is modular in design. It allows you to plug together any
combination of analog and digital inputs and outputs that will
fit in the available slots. The card cage base snaps onto a standard
DIN rail for back panel mounting. If an operator panel is required,
the base snaps onto any variety of available OptiLogic™ operator
panels, which can in
turn be panel mounted. The Ethernet connection provides a 10BaseT
connection to the network.
A System built with OptiLogic™ RTUs allows you to monitor
and control equipment and systems spread throughout a building.
A PC with a standard Ethernet connection can serve as the central
controller. Input data, output control and operator panel operation
are only a millisecond response away.
If you are a software professional, you can
easily develop your own software
to run on the PC and interface OptiLogic™ RTUs. A Software
Development Kit is available for such purposes.
Features 
- Modular design, card cage based system
- 10BaseT Ethernet communications
- Variety of digital I/O and analog I/O modules
available
- Variety of snap-on operator panels available
- Specialty module for specific functions
available for plug-in application
- DIN rail or panel mount
- Snaps together to create a single-piece
RTU
- Easy to use SDK available
- Compatible with easy to use graphical programming
packages
Benefits
- Extreme flexibility
- Low cost
- High speed I/O for PC-based applications
- Easy to configure and use
- Reduces system integration and retrofit
costs
- Attractive, eye-appealing appearance
OptiLogic Base Description
The figure above shows an OptiLogic™ Ethernet
RTU base. The particular base shown is a 8 slot base. (Bases with
different numbers of slots are available and have the same basic
features.) An OptiLogic™ Ethernet RTU base consists of a
card cage containing an OptiLogic™ motherboard. The base
unit has a built in Ethernet port, as well as an RS232 port. The
OptiLogic™ Base mounts by snapping onto a standard DIN rail,
or by snapping onto the DIN rail built into OptiLogic™ operator
panels. When attached to an OptiLogic™ operator panel, the
complete assembly can then be panel mounted. I/O and specialty
modules plug into the available slots in the OptiLogic™ base.
Specifications
Physical (RTU Base)
- DIN rail mount to 35mm DIN rail
- Overall dimensions (OL4058)
8.4"L x
3.25"H x 3.00" D
- Color : Dark gray
- Material : Polycarbonate plastic
- # I/O slots : 8
Electrical
- Power : 8 - 30 VDC input power
- Minimum load current (no I/O boards or
operator panel attached)
- 75mA @ 24VDC
- 150mA @ 12VDC
- Maximum load current (actual depends on
the particular modules attached)
- 700 mA @ 24VDC
- 1.4A @ 12VDC
- Power available to I/O modules : 2.8A @
5VDC
- Power Connection : Terminal block, 2 terminal
Environmental
- Storage Temperature : -20 to 70 C
- Ambient Operating Temperature : 0 to 55C
- Humudity : 0 - 95% non-condensing
Communications
Ethernet
- Type : 10Base-T ethernet
- Data Rate : 10 Mbps
- Connection : RJ45
- Ethernet Protocols : IPX, UDP/IP
RS232 Port
- Baud rates : 300, 1200, 2400, 4800, 9600,
19.2K (selectable)
- Data bits : 7 or 8 (selectable)
- Parity : odd, even, or none (selectable)
- Stop bits : 1 or 2 (selectable)
- Connection : RJ12
See more OptiLogic products:
back
to main products : contact
us : order
|
Customer Support
About Us
Contact Us
Nematron |
