OptiMate® OM1224
Pushbutton Panel
The OM1224 Pushbutton Panel provides a flexible
and cost-effective alternative to expensive hard-wired pushbuttons.
The panel features 24 user-legendable pushbuttons arranged in three
rows of eight buttons. Each of the buttons can be individually
configured to operate as either a momentary or alternate action
pushbutton.
Buttons can be custom labeled by the user with
the plastic insert. The insert can be custom legended with text
and/or graphics, and slipped into a protective pocket behind the
faceplate.
The OM1224 Pushbutton Panel is part of Optimation's
OptiMate® series.
Each OptiMate® module is designed to connect to a microprocessor
or most PLC's with a single cable connection. OptiMate® modules
can be used individually or together with any combination of other
OptiMate® modules.
When used with a microprocessor system, simple
communications over either an RS232 or RS422 communications cable
allows the microprocessor to directly read the state of each
button.
When used with a PLC, operation is transparent
to the user. All the user must do to retrieve button status is
to read PLC registers. The OM1224 takes care of the rest.
Features 
- 24 tactile snap pushbuttons
- Independently configurable for momentary
or alternate action mode
- User-Legendable
- Stand alone capability with direct connection
to most PLCs
- Compatible with any computer via serial
communications
- Mix and match with other OptiMate® modules
Benefits
- Saves valuable I/O rack space
- Eliminates the need for controller I/O
modules for operator panel use
- Reduces system integration and retrofit
costs
- Removes and replaces maintainability
- Rapid future expansion
- Reduced maintenance costs
- Attractive, eye- appealing appearance
Direct Connect to PLCs
OptiMate® modules connect and operate directly
with most major PLCs. A simple cable connection allows the PLC
to access each button directly simply by reading bits in data registers.
Everything else is totally transparent.
PLC Multi-Modules
The OptiMate® series provides the means
to construct large custom panels with standard building- block
modules. OptiMate® modules can be grouped together or separated
by up to 4000 feet. Any combination of operator panels and I/O
can be incorporated into a system.
Microprocessor-Based Systems
OptiMate® modules connect to any computer
or microprocessor-based system through a serial link. Either RS232
or RS422 communications can be employed. The microprocessor controller
simply polls for module data or sends module commands to completely
control the operator panels and IO.
Legending the Buttons
Legending the OM1224 module involves simply
sliding a legend transparency in a pocket in the module overlay.
The bezel can be removed from the front of the module. Once this
is done, a legend transparency can be placed in the pocket in the
overlay (between the surface layer and the white backing).
A legend
transparency can be created by a number of methods. Computer
graphics programs combined with overhead transparency paper and
a laser printer and/or copier produce excellent results. Other
options are listed in the OM1224 data sheet.
Specifications
Physical
- Recessed Mount Housing 9.5"L x 4.0"H
x 1.75"D
- Cutout size for above 3.55"Hx8.45"L
- Panel Fasteners : Four, 6x32 threaded studs
(on ends, symmetrical about center line)
- Weight : 18 ounces
- Color : Dark Gray with black panel
- Button dimensions : .65" square on .75" centers
- Button life : 1,000,000 switch cycles
Electrical
- Power (all LED's on) : 8 - 30VDC @ 4Watts
- 310 mA @ 12VDC
- 170 mA @ 24VDC
- Power connector : Pluggable terminal block,
2 position
Communications
- RS232 and RS422
- 4800 to 19200 baud
- Compatible with most major PLC protocols
- Microprocessor- compatible protocol
- 15 pin female 'D' shell connector
Environmental
- Enclosure - NEMA 4 (installed) recessed
mount
- Temperature - 0 to 50 C
- Humidity - 95% Non-condensing
Labeling of Lamps and Pushbuttons
- User-defined slide-in labels
See more OptiMate Model
Series:
back
to main products : contact
us : order
|
