OptiMate® OM414
Module with Dark Gray Enclosure
The OM414 Setpoint/Display Panel is a low cost/
high performance man/machine interface with a broad range of operator
input and display capabilities. The panel includes six field points
which can be used for either setpoint entry or data display.
Setpoints
(display points) can be custom labeled by the user with plastic
inserts. The inserts can be custom legended with text and/or
graphics, and slipped into protective pockets behind the faceplate.
Setpoint
adjustment can be performed by use of the arrow keys to move the
value up or down. The Select key is used to scroll between the
six setpoints. An LED to the left of each label insert shows which
one is currently active.
The OM414 Setpoint/Display Panel is part of Optimation's OptiMate® series.
Each OptiMate® module is designed to connect to a PLC with
a single cable connection. OptiMate® 400 series panels can
be used individually with a PLC or in a microprocessor system.
When used with a microprocessor system, simple
communications over an RS232 communications cable allows the microprocessor
to directly read setpoints and update each display point.
When used
with a PLC, operation is transparent to the user. Panel functions
tie directly into your PLC ladder logic program. The OM414 takes
care of the rest.
Features 
- 6 independent setpoints or display points
with eight-digit numeric display
- BCD "Double" cabability
- Pushbutton item selection
- Non-volitile storage of setpoints
- User-Legendable
- Stand-alone capability with direct connection
to most PLCs
- RS232 communications
- Mix and match with most other OptiMate® modules
Benefits
- Saves valuable I/O rack space
- Eliminates the need for controller I/O
modules for operator panel use
- Reduces system integration and retrofit
costs
- Removes and replaces maintainability
- Rapid future expansion
- Attractive, eye-appealing appearance
Direct Connect to PLCs
OptiMate® modules connect and operate
directly with most major PLCs. A simple cable connection allows
the PLC to control each lamp directly simply by setting bits in
data registers. Everything else is totally transparent.
Microprocessor-Based Systems
OptiMate® modules connect to any computer
or microprocessor-based system through a serial link. RS232 communications
can be employed. The microprocessor controller simply polls for
module data or sends module commands to completely control the
operator panels.
Legending the Field Points
Legending the OM414 module involves simply
sliding a legend transparency into the pockets in the panel overlay.
The bezel can be removed from the front of the module. Once this
is done legend transparencies can be placed behind the overlay.
A legend transparency can be created by a number
of methods. Computer graphics programs combined with overhead transparency
paper and a laser printer and/or copier produce excellent results.
Other options are listed in the OM414 data sheet.
Configuration
Configuring the OM414 requires the OM-WIN EDIT
Configuration Editor, a cable connecting your PC to the module,
and a 5VDC power supply with a center negative plug: all sold by
Optimation.
Specifications
Physical
- Recessed Mount Housing 6.6"L x 4.0"H
x 1.25"D
- Cutout size for above 3.55"Hx5.80"L
- Panel Fasteners : Four, 6x32 threaded studs
(on ends, symmetrical about center line)
- LED numeric digit height : 0.3 inch
- Housing color : Dark gray
Electrical
- Power (all LEDs on): 5VDC @ 0.85 Watts
170mA @ 5VDC
- Power connector :DC Power plug, center
negative
Communications
- RS232
- 4800 to 19200 baud
- Compatible with most major PLC protocols
- Microprocessor-compatible protocol
- 6 pin RJ12 phone jack-type connector
Environmental
- Enclosure - NEMA 4 recessed mount
- Temperature - 0 to 50 C
- Humidity - 95% Non-condensing
Labeling of Lamps and Pushbuttons
- User-defined slide-in labels
See more OptiMate Model
Series:
back
to main products : contact
us : order
|
