OptiMate® OM613
Module with Dark Gray Enclosure
The OM613 Operator Panel provides 4 numeric
fields, which can be used for either setpoint entry or data display,
four pushbuttons, and two large indicator lamps.
Setpoints (display
points), lamps and buttons can be custom labeled by the user
with plastic inserts. The inserts can be custom legended with text
and/or graphics, and slipped into protective pockets behind the
faceplate.
Lamps can be individually controlled to be
on, off, or flash. Each button can be individually configured to
operate as either a momentary or alternate-action pushbutton.
The
OM613 Operator Panel is part of Optimation's OptiMate® series.
Each OptiMate® module is designed to connect to a microprocessor
or to most PLC's with a single cable connection. OptiMate® modules
can be used individually, or together with any combination of other
OptiMate® modules.
When used with a microprocessor system, simple
communications over either an RS232 or RS422 communications cable
allows the microprocessor to directly read setpoints and to write
display values.
When used with a PLC, operation is transparent
to the user. Panel functions tie directly into your PLC ladder
logic program. The OM613 takes care of the rest.
Features 
- 4 independent setpoints or display points
with four-digit numeric display
- Two large LED light bars
- Four tactile snap membrane function buttons
- Non-volitile storage of setpoints
- User-Legendable
- Stand alone capability with direct connection
to most PLCs
- Compatible with any computer via serial
communications
- Mix and match with other OptiMate® modules
Benefits
- Saves valuable I/O rack space
- Eliminates the need for controller I/O
modules for operator panel use
- Reduces system integration and retrofit
costs
- Removes and replaces maintainability
- Rapid future expansion
- Attractive, eye-appealing appearance
- Direct Connect to PLCs
OptiMate® modules connect and operate directly
with most major PLCs. A simple cable connection allows the PLC
to control each lamp directly simply by setting bits in data registers.
Everything else is totally transparent.
PLC Multi-Modules
The OptiMate® series provides the means
to construct large custom panels with standard building block modules.
OptiMate® modules can be grouped together or separated by up
to 4000 feet. Any combination of operator panels and I/O can be
incorporated into a system.
Microprocessor-Based Systems
OptiMate® modules connect to any computer
or microprocessor-based system through a serial link. Either RS232
or RS422 communications can be employed. The microprocessor controller
simply polls for module data or sends module commands to completely
control the operator panels and I/O.
Legending the Field Points
Legending the OM613 module involves simply
sliding a legend transparency into the three pockets in the panel
overlay. The bezel can be removed from the front of the module.
Once this is done legend transparencies can be placed behind the
overlay.
A legend transparency can be created by a number
of methods. Computer graphics programs combined with overhead transparency
paper and a laser printer and/or copier produce excellent results.
Other options are listed in the OM613 data sheet.
Specifications
Physical
- Recessed Mount Housing 6.6"L x 4.0"H
x 1.25"D
- Cutout size for above 3.55"Hx5.80"L
- Panel Fasteners : Four, 6x32 threaded studs,
(on ends, symmetrical about center line)
- LED numeric digit height : 0.3 inch
- Housing color : Dark gray
Electrical
- Power : (all 8's) 8 - 30VDC @ 2.2 Watts,
180 mA @ 12VDC, 90 mA @ 24VDC
- Power connector : Pluggable terminal block,
2 position
Communications
- RS232 and RS422
- 4800 to 19200 baud
- Compatible with most major PLC protocols
- Microprocessor-compatible protocol
- 15 pin female 'D' shell connector
Environmental
- Enclosure - NEMA 4 recessed mount
- Temperature - 0 to 50 C
- Humidity - 95% Non-condensing
Labeling of Lamps and Pushbuttons
- User-defined slide-in labels
See more OptiMate Model
Series:
back
to main products : contact
us : order
|
